 |
TOOTHED GEARINGS
MANUFACTURE AND REPAIR |
|
|
|
|
 |
|
The GTRPC “Zorya”-“Mashproekt” Gearbox production has extensive experience in designing,
manufacturing, testing and repairing (restoration) of practically all toothed gearings:
cylindrical, bevel external and internal gearings with spur, helical, herring-bone,
involute and bevel as well as circular teeth.
Modules being used are in the range from 0.6 mm to 12 mm.
Gears being manufactured have diameter from 10 mm to 3400 mm. |
|
|
 |
|
The gearbox production has a complete cycle of production of all components,
being a part of the gearbox – casing and stator elements as well as rotating parts.
The gearbox production has special test stands to check the quality
of the gearboxes being manufactured and repaired.
|
|
|
 |
|
The gearbox production has a wide experience in repair and replacement
of gearboxes being used in different branches of industry.
In this case the Customer is not obliged to have original design documentation.
Experts from the gearbox production will restore all necessary sizes
of reparable gears. |
|
|
 |
|
Toothed gears are subjected to measurements and checking, using state-of-the-art
instruments for non-destructive inspection (magnetic particle inspection,
luminescence, etc.). In case of replacement of the gears failed during operation,
manufacturing of new gears and fitting of teeth is carried out.
Applicable chemical and thermal procedures provide hardness of teeth
working surfaces up to 56-60 HRC. |
|
|
There is a special gearbox design department in R&D Center “Mashproekt”,
which is able to design gearboxes according to the Customer’s request.
In this case all stages of work on the design of critical elements and the design
itself are fulfilled. |
|
|
DURING THE GEARBOX DESIGNING AND MANUFACTURING WE DO NOT LIMITED TO MODERN EQUIPMENT ONLY,
BUT WE ALSO USE HALF-CENTURY EXPERIENCE IN THIS FIELD AS WELL AS DOZENS OF PATENTED KNOW-HOW
AND INVENTORS CERTIFICATES.
|
